RESEARCH DOSSIER
Insurance Distribution Outsourcing and Responsibility Allocation
Abstract. Insurance distribution frequently combines risk carriers, independent intermediaries, appointed representatives, commercial partners, digital platforms and contracted service providers. Their division of labor expands market access while creating complex relationships between performance, control, legal duties and consumer outcomes. This monograph examines how customer-facing functions can be delegated while responsibility remains traceable across the insurance product lifecycle. Comparative documentary analysis considers the European Union, United Kingdom, Australia and United States alongside international supervisory guidance and established economic literature. The inquiry distinguishes product manufacturing from distribution, outsourcing from legally authorized delegation, retained accountability from civil liability and contractual cost allocation, and individual complaints from evidence of systemic harm. Supervisory findings, illustrative responsibility matrices and explicitly hypothetical quantitative examples identify how fragmented information and decision rights can obstruct monitoring and remediation. The analysis concludes that the effectiveness of outsourced distribution depends on the congruence of applicable obligations, operational authority, evidence and intervention capacity. It identifies methodological requirements for future empirical studies without asserting a causal effect, universal liability rule or new theoretical system.
Keywords: insurance distribution; insurance intermediation; outsourcing; delegated authority; product governance; conduct risk; appointed representatives; embedded insurance; consumer protection; regulatory accountability; remediation
Introduction
Insurance distribution outsourcing is the organization of insurance sales and related consumer-facing functions through legally separate organizations that perform activities for or in coordination with an insurer or intermediary. Responsibility allocation concerns the assignment of decision authority, performance obligations, oversight, evidence custody, and obligations to correct harm. These components can follow different paths through a distribution chain. Their alignment determines whether a customer can receive the protection promised by the insurance arrangement and whether the competent authority can reconstruct the decisions leading to a sale.
A policyholder normally experiences an insurance transaction as a continuous service. The legal and technical production of that service may involve an insurer, a product designer, a broker or agent, a commercial partner, a website operator, a payment service and a contact center. A single purchase screen may combine decisions from each organization. It may conceal the fact that the party marketing a product cannot change its conditions, while the party authorized to change the conditions sees little of the customer's experience. Uncertainty over responsibility is therefore a distinct source of conduct risk, even where the underlying insurance contract is valid and the insurer is solvent.
The inquiry belongs to the science of insurance distribution and intermediation. It studies the allocation of customer-facing responsibilities and related supervisory and contractual functions from product preparation to sale, ongoing service and corrective feedback. Enterprise-wide outsourcing, the technical architecture of cloud infrastructure, the law of insurance claims adjustment, and the prudential treatment of transferred underwriting risk are adjacent subjects. They enter this inquiry only where they change the distribution relationship.
The method is structured comparative institutional analysis. The unit of comparison is the function performed, the legal actor exercising it, and the channel through which customer consequences are observed and addressed. The analysis examines the European Union's insurance distribution and product governance texts, the United Kingdom's appointed representative and product governance experience, Australia's product design and distribution guidance, and the United States' state-based licensing architecture. International supervisory materials provide a comparative reference. Selected passages of scholarly articles supply economic context; supervisory surveys and reviews provide situated observations. This is a purposive documentary study, not a systematic review of all countries, a jurisdiction-specific legal opinion or an estimation of treatment effects. Laws are discussed at the level and version of the identified text; individual national implementation, exemptions and remedies require separate verification. The research cutoff is November 19, 2026, with legislative versions and dated supervisory findings identified in the references.
The central question is how a regulated activity may be divided among organizations while maintaining a coherent relationship between the customer, the responsible actor and the information required to demonstrate compliance. The analytical contribution consists of a comparative synthesis of the duties and interfaces, supported by responsibility mapping and illustrative calculations. The inquiry applies established concepts rather than proposing a new theory.
The Insurance Distribution Chain as a Network of Accountabilities
The transaction and its organizational components
Insurance exchanges a present premium commitment for a contingent contractual obligation. Distribution connects potential insureds with the institution assuming the risk. The customer must identify a need, obtain intelligible information, evaluate terms and complete the contract. The insurer needs accurate exposure information, a valid formation process and an operational means of maintaining the relationship. Intermediaries may contribute access, search, negotiation, assistance and specialized knowledge.
The economics of delegation follows from specialization. A specialist distributor may reach customers the insurer cannot cheaply access, translate technical language, compare alternatives or deliver a service at a moment of relevant demand. A retail partner can reduce search costs by offering coverage during a purchase. At the same time, dependence on the partner creates informational and incentive problems. The analysis of commercial property-casualty intermediation by Cummins and Doherty (2006) situates intermediary functions, compensation and policy placement within an economic inquiry. The authors distinguish potential informational benefits of profit-sensitive compensation from the concern that remuneration can influence placement. Their discussion on pp. 384–386 explicitly qualifies the generalizability of a behavioral study based on one regional agency. Their historical commercial-market evidence and theoretical arguments do not establish conduct effects in contemporary embedded distribution.
One established explanatory lens is the agency-cost problem described by Jensen and Meckling (1976). The authors distinguish the principal's monitoring expenditure, the agent's bonding expenditure, and the residual welfare loss associated with divergent decisions (pp. 308–309). Applied to distribution, these categories separate investments in supervision, commitments made by service providers, and consequences that persist despite those arrangements. Insurance distribution adds a third interest: the customer seeks useful protection and intelligible service. There may also be several principals, because the intermediary can have contractual relationships with insurers and duties to customers. Agency as an economic analytical category is consequently broader than agency as a legal status.
Consider a broker presenting two products. The insurer wants commercially acceptable risk and adequate premium. The customer values coverage and assistance if an insured event occurs. The broker may be paid for placement. Where compensation varies by product, differences in incentives deserve examination, but the existence of remuneration alone cannot establish that an unsuitable recommendation occurred. Quality depends on the available options, the customer's circumstances, the information actually disclosed and the selection process.
Distinct meanings of responsibility
A service agreement may allocate performance to a contractor while a statute imposes a duty directly on another organization. An internal approval assigns organizational decision authority; a civil action may impose a different liability after an injury; an indemnity between firms may redistribute financial cost after that liability is determined. These five dimensions should remain analytically distinct.
Performance responsibility describes who carries out the action. Authorization identifies who may decide, bind, approve or stop it. Regulatory accountability concerns obligations imposed by applicable law and enforceable supervisory rules. Civil responsibility concerns the applicable grounds and scope of liability to an injured person. Internal financial allocation concerns contractual payments, indemnities, insurance or contribution among the participants. Evidence custody concerns who retains the information needed to investigate all of them.
For example, a call center can deliver a script, a broker can approve that script for its distribution operation and an insurer can own the product wording. An incorrect representation of coverage may therefore implicate several actions and several duties. The evidence should distinguish the wording supplied by the insurer, the script interpretation approved by the distributor and the actual words used with the customer. An investigation based only on the final recording cannot establish where a defect entered the process.
Authority, visibility and intervention
Effective oversight requires a connection between three capacities: knowledge of what occurs, authority to direct correction and resources to carry out corrective work. A contractual audit right supplies little immediate protection where a firm's monitoring team receives no usable data or cannot interpret its partner's records. An insurer able to stop its own underwriting may still face delays in disabling a product displayed by a platform. A distributor may receive complaints without authority to alter a defective product. These relationships create operational gaps even when the contracts list detailed responsibilities.
The parties can therefore analyze each substantive activity separately: approving the product; selecting sales channels; approving marketing; establishing the customer's needs; advising; binding coverage; handling payment; confirming terms; maintaining contact details; receiving complaints; and reviewing outcomes. The evidence requirement follows the action rather than the organizational chart. This functional decomposition is also useful where an organization performs multiple roles and where an outsourcing decision changes execution without changing formal authority.
Outsourcing, Delegation and Ancillary Distribution
Classification of the actual activity
Outsourcing is a contractual organization of performance. Delegation is the grant of authority to perform a decision or act within an assigned sphere. Intermediation is a distribution relationship whose legal characterization depends on the applicable regime. A delegated binding authority may allow a manager to conclude coverage within limits, while a software contractor validates inputs without exercising underwriting judgment. The boundaries differ even when both arrangements are commonly called distribution outsourcing.
A robust classification begins with behavior, not a vendor's name. Relevant facts include whether a party recommends a named product, ranks choices, receives remuneration linked to a sale, collects information necessary for conclusion, communicates acceptance or has discretion over contractual terms. A business performing only technical processing is analytically distinct from one making consequential product selections. The question becomes more difficult when a technical service supplies a default option that the customer rarely changes.
Under the EU's Insurance Distribution Directive (2016, Article 2), activity enabling the conclusion of insurance can include online comparison and ranking. A mere information service is subject to the exclusions in Article 2(2). The significance of an algorithm or web interface therefore depends on its function within the purchasing process. A platform must be analyzed according to its real role and the implementing jurisdiction rather than its branding as a marketplace or technology company.
Article 1 provides a defined ancillary-intermediary exemption subject to conditions. Article 1(4) establishes residual safeguards where distribution occurs through an exempt ancillary intermediary, including information and arrangements concerning demands and needs, conduct and the relevant product information document. It is therefore possible for an intermediary exemption and retained obligations elsewhere in the distribution arrangement to coexist. The thresholds and product conditions of the exemption must be assessed directly; a general assertion that add-on insurance is unregulated would be incorrect.
Delegated discretion and boundaries
Delegated authority should be specified by product, territory, customer class, risk characteristic, term, financial limit and authorized process. A binding mandate allowing a broker to accept risks up to a specified amount does not by itself grant authority to modify exclusions or authorize unapproved discounts. An authority record is useful only if it can be translated into the controls through which the relevant decisions are taken.
A useful operational example is a delegated underwriting quote with an eligibility rule requiring referral where the customer's activity involves commercial delivery. If the front-end application changes a classification to remove delivery questions, the insurer's backend may accept a risk that was never properly evaluated. The event concerns information design, sales execution and delegated underwriting authority. Recovering the original questions, their versions and the answers supplied is essential. Merely observing that the acceptance fell below a financial delegation limit does not resolve the eligibility defect.
An introducer arrangement raises the opposite question. A commercial partner might provide contact details for an insurer, while the insurer retains the recommendation and contracting process. If the partner later begins comparing exclusions and steering a customer toward a contract, the activity may change in substance before the contract is updated. Classification should be repeated whenever business logic, incentives, user-interface language or delegated rights change.
Subdelegation and mixed services
Subdelegation expands the chain between the appointed party and the party performing work. A distributor may subcontract telesales or customer support; its contractor may use an external software system for product suggestions. Each additional link introduces a possible break in evidence, authority, competence and continuity.
Contractual permission to subcontract is only one element of the analysis. An organization deciding whether to permit subdelegation should ascertain which tasks may be reassigned, which actors are legally permitted to perform them, what data must be retained and which entity can halt the activity. The principal's practical access to the subcontractor's records must survive a dispute with the direct contractor. Concentration becomes relevant where nominally independent distributors rely on the same sales engine: changing one direct vendor may fail to remove the dependency.
These issues also arise within corporate groups. A shared-service entity can own technical capacity while regulated subsidiaries have different legal responsibilities and customer populations. A group-wide service arrangement needs a usable legal-entity allocation of records and decision rights. A corporate relationship does not establish that every subsidiary has the rights or competence needed for its individual obligations.
Roles of Product Manufacturers, Distributors and Platforms
Manufacturing and product decisions
A product manufacturer defines or determines important product characteristics. The risk carrier supplies contractual insurance coverage; the manufacturer role can overlap with that function but is independently relevant to product governance. An intermediary may influence coverage design, eligibility conditions, exclusions, pricing and customer accessibility. The functional description is essential to the allocation of oversight.
The European Commission's product oversight and governance regulation (2017, Articles 3–4, consolidated 2022) identifies intermediaries as manufacturers when their actual design and development role meets the specified decision-making test. A jointly manufacturing intermediary and insurer must document collaboration and role allocation. Manufacturers using an external designer retain responsibility for the approval process. Adaptation for an individual customer has a distinct treatment under Article 3(3). These provisions prevent a general equivalence between individualized advice and manufacturing.
A collaboration might assign market research and the initial specification to an intermediary, underwriting analysis to the insurer and final software configuration to a contractor. The substantive manufacturer questions remain: who can determine essential product features, whether proposed changes undergo significant independent revision, and how the parties agree on the target market. Evidence includes product committee approvals, drafts, changes requested and the final authorized version.
Product governance and individual selling duties
Product governance addresses the fit between a product and a class of potential customers across its lifecycle. Individual selling duties address the transaction involving a particular customer. They use different data and operate at different levels. A useful target-market description cannot verify a customer's individual needs, and a single apparently appropriate sale cannot establish that the product performs well across its intended market.
The EU directive's demands and needs provisions (2016, Article 20) require the proposed contract to correspond to the customer's insurance demands and needs, with additional personalized explanation where advice is provided. Article 17 establishes general conduct obligations. The application of these provisions depends on the transaction's legal scope and the national implementation.
The delegated regulation distinguishes manufacturer monitoring of channel alignment from general distributor obligations toward individual customers (Article 8(4)); distributors maintain their own arrangements and convey relevant information under Article 10. This distinction is important. A manufacturer reviewing aggregate sales cannot be presumed to have fulfilled or displaced each duty of an independently regulated adviser. Equally, an adviser cannot cure a systemic product design defect solely through careful individual sales.
The platform as a site of distributed decisions
Digital distribution introduces several layers of control: interface ranking, eligibility logic, product display, data collection, recommendation, underwriting acceptance, payment and communication of the contract. These may be maintained by different organizations and released on different schedules. A legally approved product can be represented incorrectly if the website's product summary does not update when underwriting conditions change.
Suppose a travel booking platform offers cancellation insurance. The insurer specifies the coverage and exclusions; a broker negotiates the placement; the platform provides the purchasing interface; a technology provider controls the selection logic. The customer experiences one transaction. If the insurer revises an exclusion but the interface displays an old summary, causation cannot be inferred merely from the company whose logo appears at checkout. The operative product version, the distribution contract, release approvals and the exact screen presented are required.
An interface that preselects coverage may increase acceptance while reducing the deliberateness of the choice. The extent of harm depends on price, disclosure, ease of opting out, eligibility and customer utility. Controls that measure conversion without observing cancellations, coverage mismatch and complaint outcomes have an incomplete picture. The point of investigation is the mechanism by which a design decision changes the information and options presented to customers.
Allocation between operators
The following illustrative allocation is a process analysis. It does not replace legal classification or imply that the same party bears a statutory duty in every country.
| Activity | Typical performing actor | Typical control or decision owner | Evidence |
|---|---|---|---|
| Design essential coverage | Carrier and/or manufacturer intermediary | Legally identified manufacturer(s) | Product approval, specifications |
| Present product and collect needs | Distributor or authorized sales service | Responsible distributor, with manufacturer channel oversight | Exact interface, disclosures, needs record |
| Approve binding decision | Insurer or authorized delegate | Carrier and authorized decision maker | Authority limit, referral, acceptance record |
| Monitor product outcomes | Manufacturer and distributor | Each for applicable obligations | Sales, cancellations, complaints, review decisions |
| Correct customer harm | Responsible firm(s) with service providers | Actor(s) bearing relevant remedial duty | Case reconstruction, payments, notification, closure |
| Maintain customer service | Carrier, administrator or distributor | Respective service and regulatory duty holder | Transfer history, timestamps, records |
The table exposes a feature that can be missed by an organizational inventory: a given activity may require an executor, a party with approval power and a different organization with monitoring or remedial duties. When one party occupies several roles, the functions still benefit from separate documentation. The presence of more than one accountable party does not establish duplicative liability; the relevant duty, legal relationship and facts determine it.
Contractual Service Levels, Monitoring and Auditability
Turning responsibility into observable performance
Distribution agreements are mechanisms for organizing performance and information exchange. Their role starts with the precise description of permitted activities, products, eligible customers, geographic limits, delegated rights and remuneration. A vague commitment to comply with all applicable laws offers less practical discipline than a traceable description of actions, decision owners, reporting obligations and evidence retention.
A service level agreement is most effective when obligations can be measured in units related to customer outcomes. Examples include the proportion of issued policies accompanied by the correct disclosure version, elapsed time between a product update and deployment of corrected materials, completeness of needs records and the time from a complaint to acknowledgment and referral. The service level is a contractual measure. It does not create a universally applicable legal threshold.
A contract should distinguish normal performance from exception handling. Exceptional cases reveal whether control truly exists. The insurer and distributor can agree how product discrepancies are investigated, how the partner's sale channel is restricted and who contacts affected customers. A party unable to access the necessary records within a useful interval cannot demonstrate the operation of these controls merely by citing the contractual provision granting access.
Evidence design and traceability
Traceability requires the ability to link an insurance policy to the antecedent sales actions that generated it. An appropriate record might include a stable transaction identifier, jurisdiction, distributor identity, applicable permission, product and disclosure version, customer inputs, outcome of decision rules, referral status, timestamp and confirmation of delivery. The purpose of collecting each item should be stated in relation to compliance, service and investigation. Retention and access must also respect applicable confidentiality and data protection requirements.
Version control is especially important in a dynamic sales environment. At any later date, the investigator must know which product description, eligibility logic and customer consent flow were operative at the time of a transaction. Keeping only the latest template destroys historical evidence. Conversely, retaining screenshots without an index connecting them to customer and product versions makes them difficult to use at scale.
The record architecture also needs a definition of missingness. A blank needs-assessment field can indicate that a question was inapplicable, that the answer was unknown or that an external system failed to transfer the data. These states have different implications. If they collapse into a single empty value, an audit cannot distinguish appropriate omission from a systematic control failure.
Monitoring and independence
Monitoring should cover routine sales and higher-risk exceptions. A purely random sample may miss a small but problematic product or subchannel; a purely targeted sample cannot estimate overall prevalence. Combining stratified random selection with risk-based investigation enables different questions to be answered. The sample design and denominators should be documented in advance.
For a distributor operating ten channels, a common audit covering all channels at equal intensity may be inefficient. A recently onboarded partner with new scripts, high cancellation rates or rapid growth merits deeper investigation. The insurer should also examine low-volume channels periodically, because lack of volume does not guarantee acceptable conduct. Independent monitoring avoids giving the sales unit exclusive authority to define and validate its own performance.
Conflict-management measures are important where the same team earns a commission and grades the quality of sales. A quality review performed by a unit insulated from direct sales targets can reduce one obvious source of measurement bias, though the effectiveness of organizational independence depends on resources, access and governance. External assurance may add information but cannot substitute for the day-to-day operation of controls.
Continuity, correction and exit
Continuity of customer service is a distribution issue where customers have established a relationship with a particular intermediary or platform. Contract termination may interrupt contact routes, ongoing policy administration, complaint response or access to transaction records. An exit plan should identify the policies affected, the new service channel, record transfer responsibilities, outstanding complaints and rights to historical information.
An orderly exit also requires coordination of communications. If two organizations each tell customers the other is responsible, formal termination can create service abandonment. A channel should remain available to receive and route issues while responsibility is determined. Contractual cost recovery or disagreements over service fees should be treated separately from immediate mechanisms for customer support.
The appropriate controls are proportional to the range and potential severity of harm. A simple referral service and a fully delegated digital channel need different levels of testing. The relevant question is whether the arrangement can substantiate the duties and manage the consequences associated with the actual activity.
Consumer Harm, Complaints and Remediation
The lifecycle of distribution harm
Misdistribution may arise from a mismatch between the insurance terms and customer expectations, an unsuitable customer segment, an inaccurate recommendation, unclear opt-in procedures or failures during service. Its effects may emerge at purchase, renewal, cancellation or the first attempted claim. A customer can be unaware of a defect until a loss occurs, so complaints received immediately after sale represent only one observation window.
The IAIS conduct of business guidance (2024, ICP 19.0.10) addresses the insurer's continuing ultimate responsibility for outsourced processes and the expectation that outsourced functions support fair treatment. This is international supervisory guidance within a standard-setting framework, not a uniform self-executing civil liability rule. The IAIS (2025) announcement of its fair treatment application paper extends the discussion across the insurance product lifecycle, including distribution, assistance, complaints and monitoring. These materials support examining continuity of outcomes rather than concluding the inquiry when a policy is issued.
An unsuitable sale and a valid rejection of a claim should be distinguished. A policy may properly exclude a loss as a matter of contract, while a misleading sales representation created an expectation that the loss would be covered. Distribution harm concerns the original conduct, associated duties and consequences; the coverage decision is a separate issue subject to insurance contract law. Remedial analysis must account for both without assuming that every valid denial proves a defective sale or every misrepresentation automatically changes the terms.
Complaints as signals and as individual cases
A complaint presents an individual request for investigation and may provide evidence of a population-level defect. Institutions need mechanisms for both purposes. Individual resolution requires communication, fact reconstruction and an appropriate decision. An aggregate review examines whether several apparently separate complaints arise from the same script, recommendation engine, product version or partner.
Consider several customers who report being sold coverage that does not apply to their work activity. A distributor might resolve each complaint separately without identifying that all affected customers used the same intermediary's revised online form. Linking the cases to the version of the sales flow is necessary to define the potentially affected population. A simple count of complaints by carrier conceals the concentration within the partner's channel.
Complaints are imperfect indicators of harm. Reporting probabilities may vary by customer capability, loss size, language access and the ease of submitting a complaint. The contractual incentive to minimize reported complaint numbers can worsen measurement through suppression or reclassification. A review should compare complaint records with customer contacts, cancellations, rejected applications, claims-related communications and independent sampling where relevant. The purpose is to increase the probability of detecting problems rather than to maximize a single reported number.
Responsibility and the economics of remediation
A distinction between prompt redress and final allocation of cost is useful when several firms are involved. The customer may need an immediate explanation or correction while insurers and distributors investigate contractual indemnities and causal responsibility. The applicable local law specifies which actors must provide which forms of remedy. A practical service design can ensure a clearly identified point of contact, information transfer and coordination irrespective of a later dispute among firms.
Remediation involves identifying the affected population, establishing the counterfactual outcome consistent with the relevant obligation, selecting the appropriate remedy, notifying affected people and verifying execution. Financial recovery, correction of records, changes in coverage or customer assistance may be relevant depending on the facts and law. The remedy is not necessarily equal to the entire premium or an assumed insurance benefit. Causal analysis must address the difference between the actual outcome and the legally and factually justified alternative.
Records of remediation should preserve the trigger, case-selection criteria, excluded cases and reasons, estimated and actual amounts, customers who could not be reached, decisions about unresolved disputes and the date services were corrected. A firm cannot evaluate whether remediation addressed a systemic defect if its reporting records only money paid and omits the customers not identified by the original selection process.
Vulnerability and access
A distribution chain may have highly unequal capacities for recognizing customers who need assistance. The commercial partner may encounter the customer personally while the risk carrier receives standardized fields. A complicated transfer process can make special assistance unavailable precisely when it is most needed. The practical allocation of relevant information and assistance should reflect the applicable duties and the customer's situation.
Accessibility is not measured by having a nominally available channel alone. It also depends on successful communication, comprehensible information, practical alternatives and the capacity to pursue service after a sale. For customers with limited digital access, a platform's reliance on online-only complaint handling may prevent the insurer from observing conduct problems. A comparative institutional analysis should examine whether oversight mechanisms capture those whose behavior falls outside the most easily measured digital journeys.
Comparative Regulatory Practice and Supervision
International supervisory baseline
The IAIS framework supports comparison across national systems while retaining the distinction between supervisory standards, guidance and enacted law. The 2024 edition of its ICPs and ComFrame identifies retained insurer responsibility in outsourced customer-facing processes. Its relevance is the supervisory question whether the regulated organization continues to control and manage the functions necessary for compliance. National rules then determine authorization, enforcement, scope and private remedies.
The same functional concern appears through different institutional forms. A statute may impose duties directly on a principal; conduct rules may assign responsibilities separately to a manufacturer and distributor; a licensing system may organize duties around the legally authorized producer. A comparison should preserve these distinctions rather than translate them into a universal rule of joint liability.
European Union
The IDD creates a distribution-specific framework through national implementation. Its provisions on online activities, ancillary intermediation, demands and needs, and conduct provide the basis for evaluating different sales arrangements. Product oversight and governance is separately elaborated in Delegated Regulation 2017/2358. Its application must be assessed in light of the relevant product, actors, exemptions and legal text. For example, Article 25 of the IDD excludes insurance of large risks from its specified product oversight and governance requirements; that exception does not automatically remove other distribution duties.
A valuable feature of the EU framework is the relation between product governance and channel-level control. The manufacturer needs credible information concerning how the product reaches customers, while distributors need sufficient information to understand the products and their intended market. The monitoring limit in Article 8(4) of the delegated regulation is analytically significant: it distinguishes a product manufacturer's monitoring of product-approval objectives from the general conduct obligations of distributors toward particular customers.
European cross-border distribution illustrates why legal mobility and operational oversight require different evidence. EIOPA's third IDD report announcement (2026) reports a 12% increase in intermediaries holding an EU passport between 2020 and 2024 and identifies uneven progress in advice and sales quality. This is an administrative trend for the reported period; it is neither a measure of outsourcing prevalence nor proof that passporting changes conduct outcomes. The source is the announcement, rather than an independently reproduced quantitative analysis of the underlying report.
United Kingdom
The United Kingdom's appointed representative regime provides a particularly visible statutory and supervisory relationship between a regulated principal and another actor performing regulated activities. Under section 39(3) of FSMA 2000, the principal bears responsibility for the representative's actions and omissions in the activities for which the principal accepted responsibility, to the same extent as if it had expressly authorized them. The statutory scope of accepted business is therefore a central factual question, distinct from internal allocation of costs. FCA Handbook SUP 12 sets out appointment, control and monitoring requirements and addresses insurance distribution-specific matters. It is necessary to determine the appointed activity, principal, scope of responsibility and permission rather than treating every commercial supplier as an appointed representative.
The FCA's historical general insurance thematic review (2016) surveyed 190 principals, selected 15 for detailed review and visited 14 principals and 25 representatives. More than half of the detailed sample could not reliably demonstrate effective controls, and potential mis-selling or customer detriment was found at one third of sampled principals. These findings identify deficiencies within a selected supervisory sample; they cannot establish population prevalence or establish that appointed representation caused the problems. The regulator now marks the review historical.
The FCA's appointed representative oversight review (2024) followed rules effective December 2022 and examined implementation of stronger oversight expectations, including self-assessment, ongoing monitoring and orderly offboarding. The development illustrates the importance of testing a principal's actual ability to manage a representative network over time. Written documentation and evidence of operational ability answer different questions.
The FCA's separate product governance thematic review (2024) assessed 28 manufacturers and 39 distributors across ten general insurance and pure protection products. It examined value and governance against PROD 4 and identified shortcomings. Its observations are relevant to the interface between product value and distribution practices, but the sample and legal scope preclude converting them into a generic worldwide misconduct rate.
Australia
Australia's design and distribution obligations under Part 7.8A of the Corporations Act are explained in ASIC's Regulatory Guide 274 (2024). The guide distinguishes issuers and distributors of covered financial products; the target market determination (TMD), reasonable steps in applicable distribution conduct, review and information flows are central. Particular activities, including personal advice, can receive distinct treatment. The guide must be applied to the legally covered product and conduct rather than treated as a general description of every insurance transaction.
The Australian arrangements illustrate how issuer and distributor coordination can operate through an explicit product market document, distribution conditions, review triggers and information supplied by parties involved in sales. The documentation becomes useful to oversight only when the issuer can interpret and respond to relevant observations, and distributors can apply the market conditions in the actual customer journey.
An out-of-target transaction is not automatically conclusive proof of breach of a reasonable-steps obligation; the guide discusses the distinction between conduct and individual outcomes. This is valuable in comparative analysis because regulatory duties directed toward a process cannot simply be measured by counting every undesirable outcome as a violation. The relevant standard, conduct, information available and justified exceptions must be assessed.
United States
The United States organizes insurance licensing through state law. The NAIC's model law framework lists the Producer Licensing Model Act and Managing General Agents Act and describes state adoption as the means through which harmonization occurs. A model text has no uniform legal effect merely because NAIC has adopted it. The scope and operative version in each state must be verified before stating a binding obligation.
The NAIC producer licensing overview (n.d.) discusses activities including selling, solicitation and negotiation of insurance. An insurance distribution contract should therefore be examined against applicable state licensing and activity definitions, including the actual status of any producer or manager and the authority granted. This dossier does not purport to survey the enactment or case law of all states. In particular, liability for a producer's conduct depends on facts and the applicable statutory and common-law relationships, not simply on a shared commercial identity.
The NAIC's Managing General Agents Act (2002) provides a more specific illustration of delegated underwriting organization. Sections 2–5 distinguish the model's legally defined MGA from a commercial label, require a written allocation of shared functions, specify underwriting parameters and records access, and retain insurer review duties. The provisions are a model for state enactment, not federal law. Michigan's Insurance Code section 1409 illustrates an enacted state requirement for written division of responsibilities, including functions the insurer and MGA share. This example supports a jurisdiction-specific distinction between regulatory classification and contractual allocation; it does not establish the law of other states or the liability of every distribution vendor.
Comparing the institutional arrangements
The regimes differ in legal architecture, but a functional comparison can examine how they answer analogous questions. Which conduct requires authorization? Which actor controls the product? Who must monitor activity? Who receives information about harmful outcomes? Who must act when the arrangement is deficient?
The UK principal-representative mechanism is not interchangeable with EU product governance; the Australian TMD is not identical to the EU target market assessment; the NAIC models do not operate as federal legislation. Comparison is strongest when these systems are treated as distinct arrangements answering overlapping problems, with exact legal form and scope retained. It is weakest when institutional differences are erased through labels such as ultimate responsibility or distributor accountability without stating the duty and jurisdiction.
Operational Accountability and Research Measurement
Designing a research dataset
A meaningful empirical investigation of outsourced distribution begins by defining a population. The unit might be an issued policy, an application, a recommendation, a customer interaction or a sale attempt. Different units serve different research questions. Policy-level data measure outcomes for customers who concluded contracts; application-level data reveal exclusions or failed purchases; interaction-level data may establish how information was obtained.
Channel assignment requires particular attention. An insurance product initiated through a commercial partner, advised by a broker and completed on an insurer website can be described under several classifications. A single mutually exclusive channel variable may conceal meaningful multi-actor participation. A transaction record can instead identify the origin, recommendation, decision and servicing actors, and retain the status of each at the event time. The researcher must publish the operational definition used for outsourcing exposure.
Potential outcomes include cancellation, customer complaints, confirmed distribution defects, evidence completeness, referral rate, customer service interruption, and remediation completion. Premium and loss data may help control for product mix and observed risk, but they do not directly identify conduct quality. An otherwise sound insurer may have elevated claims rejection because of the products and insured perils it covers. A researcher should distinguish coverage outcomes from proven misrepresentation.
Illustrative funnel and rates
Suppose, purely for illustration, two distribution channels each issue 10,000 policies during the same quarter. Channel A records 80 complaints and 20 substantiated distribution defects; channel B records 150 complaints and 30 defects. Their complaint frequencies per 1,000 policies are eight and fifteen respectively; the substantiated frequencies are two and three. Those calculations describe the hypothetical cohorts. They reveal neither the probability of harm in the overall insured population nor the causal effect of outsourcing.
The ratio of substantiated cases to complaints is 25% for A and 20% for B if each defect is matched to a complaint and all complaints have completed investigation. The ratio is not comparable if A completes investigations faster or B codes unresolved complaints differently. A data dictionary must specify whether a count relates to the time a complaint was filed, the issue date of the policy or the quarter in which the investigation was completed. Multiple complaints arising from one policy require rules for policy-level deduplication.
Selection bias matters even if every ratio is correctly calculated. If channel B mainly sells complex products or serves customers with different communication needs, its rates may differ for reasons unrelated to outsourcing. A product-adjusted comparison can begin by stratifying on common product categories and time periods, documenting overlap, and comparing like units. Adjustment for observable variables cannot eliminate unobserved confounding or explain differences in the probability of customers reporting complaints.
Where investigation resources are limited, a stratified audit may oversample high-risk transactions. To estimate prevalence in the full eligible population, use the sampling probabilities or population stratum sizes. For example, if 90% of transactions belong to a low-risk stratum and 10% to a high-risk stratum, with sample-based defect proportions of 1% and 8%, the corresponding weighted descriptive estimate is 0.9 × 1% + 0.1 × 8% = 1.7%. This assumes a suitable probability sample within each stratum and accurate classification. An unweighted average of 4.5% would represent equal stratum weights, not the stated transaction population. Sampling error and clustering by vendor require separate uncertainty estimates.
Causal questions and research design
The relevant counterfactual for a causal claim is the outcome that would have occurred for comparable transactions under alternative distribution arrangements. This is difficult to observe because outsourcing decisions are endogenous. Insurers may delegate simpler business, expand through partners in regions with different customer characteristics or withdraw distribution after evidence of poor performance. Channel assignment may be a response to prior outcomes.
A longitudinal design could examine changes when a distributor adopts a new sales engine or when a firm changes a service arrangement, comparing affected and unaffected products. A difference-in-differences design would require a credible comparison group and a plausible parallel-trends assumption in the absence of the change; concurrent pricing, product and regulatory changes must be considered. If customers switch channel or vendors share the same system, interference may invalidate the assumed separation. These are conditions for a possible study, not results of an investigation conducted here.
Monitoring systems can themselves change behavior. A stricter reporting requirement may initially increase recorded complaints because previously undetected contacts are classified properly. A change in observed rates is therefore ambiguous without information about detection, reporting and investigation practices. An audit with consistent sampling and outcome definitions may provide a more useful accompanying measurement.
Reconstructing an accountability failure
Consider a hypothetical appliance retailer distributing an optional protection policy through a licensed intermediary. The insurer updates exclusions; the intermediary receives the change; a platform supplier fails to update its display; retailer employees continue promoting the older description. The first complaint arrives two months later. In analyzing causal responsibility, the researcher should identify the timing and authority of each decision, the relevant legal duties, whether the change reached all executors and whether monitoring could reasonably detect the mismatch.
The population at risk consists of transactions potentially exposed to the inaccurate description, not simply customers filing complaints. If the defect affected one frontend version during a defined date interval, the relevant cohort might be reconstructed from logs, transaction IDs and deployment history. Investigators should verify that customers in that cohort actually encountered the defective material, rather than assuming that the version tag proves exposure in every case.
A remedy may require correction of the information and investigation of individual consequences as well as a change to the release process. A partner's contractual indemnity would address allocation of costs between the firms, but the applicable customer-facing obligations need independent assessment. The counterexample is a retailer that merely refers customers to an insurer and never presents the inaccurate description; the responsible actions and evidence may then be different.
What monitoring can establish
Risk-based monitoring reveals deficiencies and can test whether a specific control operated. It cannot by itself establish a general causal effect or a complete inventory of harm. EIOPA's 2026 announcement explains that its mystery-shopping evidence found limited correspondence between sales-process thoroughness and product-profile alignment. This observation underscores the analytical distinction between process quantity and outcome quality. It does not establish that shorter sales processes are universally preferable.
The scientific objective of measurement is to link an observed customer outcome to the functions and decisions that produced it with enough information to distinguish alternative explanations. Aggregate reporting helps locate potential problems; detailed case reconstruction establishes mechanisms; comparative research evaluates patterns across organizations. Their evidentiary roles are complementary.
Conclusion
Insurance distribution outsourcing divides the production of customer-facing insurance services among multiple organizations. Its benefits arise from specialization, market access, technological capability and service scale. Its risks arise when the division of performance separates decision authority, legal obligations, visibility of customer outcomes and capacity to respond to failures.
The comparative evidence shows that the institutional arrangements governing this separation vary. The European Union assigns distinct product governance and distributor obligations and recognizes manufacturing through actual product decisions. The United Kingdom's appointed representative regime organizes supervision through the principal relationship, including ongoing oversight of accepted activities. Australia structures significant aspects of issuer and distributor coordination around product design and distribution obligations. The US framework requires attention to state licensing and enacted law. International supervisory guidance supplies a shared concern with continued accountability and fair treatment while leaving operative duties and remedies to the relevant legal systems.
The manuscript's analytical synthesis establishes four conclusions within its stated scope. First, the legal and operational identity of a distribution actor should be derived from the function performed and the applicable law, with labels and commercial contracts supplying relevant but incomplete evidence. Second, product design, individual sales, digital interfaces and monitoring are related activities with distinguishable responsibilities. Their separation requires reliable information exchange rather than assumptions that one actor's oversight substitutes for another's obligations. Third, complaints and remediation connect the customer consequences of separate actions; accessible reporting, versioned evidence and the ability to identify affected cohorts make those consequences investigable. Fourth, channel-level statistics require stable definitions, suitable denominators, explicit sampling and caution about endogenous assignment before they can support comparative or causal conclusions.
A sound distribution arrangement is therefore one whose roles can be demonstrated from the product decision to customer communication, whose participants possess the authority and information necessary for their respective responsibilities, and whose governance remains functional when a service fails or a commercial relationship ends. The scientific task is to determine how these features operate under specific market and legal conditions.
The conclusions draw on selected legislation, regulatory guidance, bounded supervisory observations and selected passages of scholarly articles. They do not establish global misconduct rates, estimate a causal effect or adjudicate specific liability. The hypothetical calculations and scenarios are transparent analytical demonstrations. Further empirical research would require transaction-level information, controlled comparisons and independent measurement of customer harm. The existing evidence supports the comparative distinctions and their operational consequences without establishing a new doctrine or a novel universal legal principle.
References
Australian Securities and Investments Commission. (2024, September 10). Product design and distribution obligations (Regulatory Guide 274). https://download.asic.gov.au/media/etgm1amc/rg274-published-10-september-2024.pdf
Cummins, J. D., & Doherty, N. A. (2006). The economics of insurance intermediaries. Journal of Risk and Insurance, 73(3), 359–396. DOI: 10.1111/j.1539-6975.2006.00180.x. https://koln.garven.com/readings/distribution/Cummins_Doherty_2006JRI.pdf
European Commission. (2017, September 21). Commission Delegated Regulation (EU) 2017/2358 supplementing Directive (EU) 2016/97 with regard to product oversight and governance requirements for insurance undertakings and insurance distributors. Official Journal of the European Union, L 341, 1–7 (consolidated August 2, 2022). https://eur-lex.europa.eu/eli/reg_del/2017/2358/2022-08-02/eng
European Insurance and Occupational Pensions Authority. (2026, March 30). EIOPA publishes third report on the application of the Insurance Distribution Directive [Report announcement]. https://www.eiopa.europa.eu/eiopa-publishes-third-report-application-insurance-distribution-directive-2026-03-30_en
European Parliament & Council of the European Union. (2016, January 20). Directive (EU) 2016/97 on insurance distribution (recast). Official Journal of the European Union, L 26, 19–59 (consolidated January 9, 2024). https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016L0097-20240109
Financial Conduct Authority. (2016, July 21). TR16/6: Principals and their appointed representatives in the general insurance sector [Historical thematic review summary; updated August 29, 2025]. https://www.fca.org.uk/publications/thematic-reviews/tr16-6-principals-appointed-representatives-general-insurance
Financial Conduct Authority. (2024, August 21). TR24/2: General insurance and pure protection product governance thematic review (updated December 3, 2025). https://www.fca.org.uk/publications/thematic-reviews/tr24-2-general-insurance-pure-protection-product-governance
Financial Conduct Authority. (2024, September 6). Principal firms embedding the new rules for effective appointed representative oversight: Good practice and areas for improvement (updated October 14, 2024). https://www.fca.org.uk/publications/good-and-poor-practice/principal-firms-embedding-new-rules-effective-appointed-representative-oversight
Financial Conduct Authority. (n.d.). FCA Handbook: SUP 12, Appointed representatives. https://handbook.fca.org.uk/handbook/sup12
International Association of Insurance Supervisors. (2024, December). Insurance Core Principles and Common Framework for the Supervision of Internationally Active Insurance Groups. https://www.iais.org/uploads/2025/06/IAIS-ICPs-and-ComFrame-December-2024.pdf
International Association of Insurance Supervisors. (2025, July 7). IAIS publishes Application Paper on fair treatment of a wide range of consumers [Publication announcement]. https://www.iais.org/2025/07/iais-publishes-application-paper-on-fair-treatment-of-a-wide-range-of-consumers/
Jensen, M. C., & Meckling, W. H. (1976). Theory of the firm: Managerial behavior, agency costs and ownership structure. Journal of Financial Economics, 3(4), 305–360. DOI: 10.1016/0304-405X(76)90026-X. https://www.liuyanecon.com/wp-content/uploads/JensenMeckling-1976.pdf
Michigan Legislature. (1956). Insurance Code of 1956, Act 218, MCL 500.1409 (as amended). https://legislature.mi.gov/Laws/MCL?objectName=mcl-500-1409
National Association of Insurance Commissioners. (2002, October). Managing General Agents Act (Model 225). https://content.naic.org/sites/default/files/model-law-225.pdf
National Association of Insurance Commissioners. (n.d.). Insurance topics: Producer licensing. https://content.naic.org/insurance-topics/producer-licensing
National Association of Insurance Commissioners. (n.d.). Model laws. https://content.naic.org/model-laws
United Kingdom Parliament. (2000). Financial Services and Markets Act 2000, c. 8, section 39(3). https://www.legislation.gov.uk/ukpga/2000/8/section/39